Note that these Excel templates no longer work on newer SVC file formats and are no longer kept up to date. Please refer to our documentation on using Spectragryph for processing field spectroscopy data: Tutorial for using Spectragryph for postprocessing field spectroscopy files (Word document).
The Facility has created a number of Excel templates which can be used to post process the spectral data files from FSF fieldspectrometers. The templates will allow multiple spectral data files to be compiled into a single spreadsheet, scaled for relative and absolute reflectance or converted to spectral radiance or irradiance values.
Download the Excel Post Processing Template files and corresponding User Guides by 'clicking' on the links within the table below. If required, the User Guide only can be downloaded by 'clicking' on the appropriate link below.
Note 1. It is also necessary to download the FSF reference panel calibration files or the FSF radiometric calibration files contained in an Excel workbook. These calibration files will be routinely updated.
Note 2. These templates were originally designed in Excel 2003 but have been revised and tested for Excel 2007, 2010 & 2013 compatibility. Please contact us if you identify compatability issues.
Note 3. Earlier versions of panel and radiometric calibration files, including ones from past years, can be downloaded from the archive page.
|Post-processing Templates for ASD Data with User Guides||User Guide for Post-processing ASD Data|
|Raw Reflectance Template_v3c and User Guide (zip file)||ASD Template User Guide v3 (pdf file only)|
|White Reference Template_v3 and User Guide (zip file)||ASD Template User Guide v3 (pdf file only)|
|Radiometric Template_v3 and User Guide (zip file)||ASD Template User Guide v3 (pdf file only)|
|Post-processing Templates for SVC HR-1024i Signature Data Files with User Guides||User Guide for Post-processing SVC HR-1024i Signature Data Files|
|HR-1024i Reflectance Template ver4 (zip file)||Guidelines for SVC HR-1024i Templates_v4 (pdf file only)|
|Post-processing Templates for GER 1500 Data with User Guides||User Guide for Post-processing GER 1500 Data|
|GER 1500 DFOV Reflectance Template v_03 and User Guide (zip file)||GER 1500 DFOV Template User Guide v_03 (pdf file)|
|GER 1500 Reflectance Template v_03 and User Guide (zip file)||GER 1500 Template User Guide v_03 (pdf file)|
|GER 1500 Radiometric Template v_03 and User Guide (zip file)||GER 1500 Template User Guide v_03 (pdf file)|
The following add-on is required for some of FSF's Excel Templates:
Further information on the calibration files for the reflectance panels and spectroradiometers can be found in the Calibration Files webpage.
By providing these resources to the user community the Field Spectroscopy Facility (FSF) takes no responsibility for the use of the software or any other resources provided on this webpage. While all reasonable steps have been taken by FSF to ensure that the resources contributed to this group perform the task described, the FSF cannot be held responsible for any problems experienced while using the datasets. Any questions or technical issues relating to an individual item should be directed to the original contributor, and not directly to the FSF. The original contributor retains the IPR for their software/program.